Diving Hood 3.5 Mm Neoprene Black

A hood created by our Subea teams for all divers, to protect their heads in cooler waters.A 3.5 mm diving hood to be worn with your wetsuit to adapt your insulation to the diving environment.

Technical features

3.5 mm neoprene hood.
Stretch neoprene around the neck and ears to ease movement and best adapt to all shapes.
Air Expulse system: a system to evacuate air bubbles trapped in the hood.
The area in contact with the face is made from smooth neoprene for greater comfort and to help stop water getting in.

GBS (glued and blind stitched) assembly

The seams of the hood are watertight, sewn with GBS stitching (Glued and Blind Stitched): the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).

Choose the right size

Measure the circumference of your head and choose the right size:
XS/S: 53- 56 cm 20.8-22.1 inch
M/L: 57-60 cm 22.4-23.6 inch
XL/XXL: 61-64 cm 24-25.2 inch

Tips to look after your diving hood

1) Soak the inside and the outside of the diving suit in clean water after each session.
2) Clean with a bactericide solution.
3) Rinse thoroughly in clean water.
4) Dry on a wide hanger in a dark and well-ventilated place.
Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene.
Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease