DOUBLE-ACTION CANOE/KAYAK HAND PUMP, LOW PRESSURE: 0-10 PSI

Designed to inflate canoes-kayaks up to 10 PSI. A manual pump designed to inflate your kayak quickly and easily.A low-pressure pump for inflating your kayak or any other type of product up to 10 PSI (tent, kite, wing, etc.) Built-in pressure gauge to protect it from knocks. Sold with 4 universal nozzles.

Inflation / deflation

Volume of air displaced: 3 L when deflating, 1.7 L when inflating.

To inflate, connect the hose to the “Inflate” side of the pump.
To deflate, connect the hose to the “Deflate” side of the pump.

Bend your knees to make it more comfortable when inflating.

Sold with a set of adaptors

In addition to its standard nozzle to inflate your dropstitch kayak to a high pressure, the pump also comes with:
– A “mini Boston” nozzle to inflate the kayak seats.
– A “Boston” nozzle to inflate low-pressure kayaks, mattresses and inflatable tents.
– An adaptor and nozzle to inflate certain kitesurfing wings.
– A thin nozzle for flexible “duck”-type valves.

Technical dimensions

Height: 569 mm
Width: 225 mm
Diameter: 105 mm
Weight: 1.4 kg

Storage advice

Use the fastening clip to attach the hose and pump together.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.

Directions for use

1/ Find a flat and solid floor
2/ Check that the hose is connected to the INFLATE side
3/ Connect the hose to the boat
4/ Inflate the boat
5/ Stop inflating when the recommended pressure is reached.
6/ Disconnect the hose from the boat

Repair

Our products are designed to be as repairable as possible. The following spare parts are available for this pump:
Handle + pressure gauge: 8810922
Aluminium tube: 8810928
Hose: 8810936